Technicial Specifications
| Operating Weight - With Cab | 27900 lb 12655 kg |
| Operating Weight - With ROPS/FOPS Canopy | 27560 lb 12501 kg |
| Weight - Drum with Cab | 17051 lb 7734 kg |
| Weight - Drum with ROPS/FOPS Canopy | 16955 lb 7691 kg |
| Note (1) | Operating weights are approximate and consider full fluids and 75 kg (165 lb) operator. Cab weights include heat and air conditioning. Operating weights are approximate and consider full fluids and 75 kg (165 lb) operator. Cab weights include heat and air conditioning. |
| Compaction Width | 84 in 2134 mm |
| Overall Length | 18.7 ft 5.7 m |
| Overall Width | 7.5 ft 2.3 m |
| Maximum Height | 9.9 ft 3.03 m |
| Drum Diameter | 60.4 in 1535 mm |
| Wheel Base | 9.8 ft 3 m |
| Gross Power | 122.9 hp 91.7 kW |
| Engine Power - ISO 14396 | 121 hp 90 kW |
| Net Power - ISO 9249 | 112.2 hp 83.7 kW |
| Net Power - SAE J1349 | 111.2 hp 82.9 kW |
| Note (1) | Net power advertised is the power available at the engine flywheel when equipped with a fan at maximum speed, air cleaner, clean emissions module, and alternator. Net power advertised is the power available at the engine flywheel when equipped with a fan at maximum speed, air cleaner, clean emissions module, and alternator. |
| Engine Model | Cat® C3.6 Cat® C3.6 |
| Emissions | U.S. EPA Tier 4 Final, EU Stage V, Korea Stage V U.S. EPA Tier 4 Final, EU Stage V, Korea Stage V |
| Stroke | 4.7 in 120 mm |
| Bore | 3.9 in 98 mm |
| Ground Clearance | 20.4 in 518 mm |
| Curb Clearance | 19.4 in 492 mm |
| Turning Radius - Inside Drum Edge | 12.7 ft 3.9 m |
| Travel Speed - Maximum | 6.8 mile/h 11 km/h |
| Fuel Tank Capacity | 56.3 gal (US) 213 l |
| DEF Tank | 5 gal (US) 19 l |
| Cooling System | 4.9 gal (US) 18.5 l |
| Engine Oil - With Filter | 3.1 gal (US) 11.6 l |
| Eccentric Weight Housings (combined) | 6.9 gal (US) 26 l |
| Axle and Final Drives | 2.6 gal (US) 10 l |
| Hydraulic Tank | 6.1 gal (US) 23 l |
| Recyclability | 95% 95% |
| Nominal Amplitude - High | 0.079 in 2 mm |
| Nominal Amplitude - Low | 0.039 in 1 mm |
| Centrifugal Force - Maximum | 56200 lb 250 kN |
| Centrifugal Force - Minimum | 33500 lb 149 kN |
| Static Linear Load - With Cab | 202.9 lb/in 36.2 kg/cm |
| Static Linear Load - With ROPS/FOPS Canopy | 201.8 lb/in 36 kg/cm |
Advantages and Features
Reliable Power
- A single propel pump design delivers excellent gradeability.
- Powered by a Cat® C3.6 engine that meets U.S. EPA Tier 4 Final, EU Stage V and Korea Stage V emission standards.
- Eco-mode limits engine RPM helping to reduce fuel consumption.
- Engine Idle Shutdown Timer reduces fuel burn and unnecessary idle time by shutting down the machine after a pre-set idling period.
Comfortable and Ergonomic Operator Station
- The ISO-mounted operator station and rubber floormats help reduce noise and vibration for comfort during operation.
- Easy to use controls are grouped by function and a large display informs operators of machine performance.
- The seat, armrest and steering column are adjustable for all-day comfort.
- Operators are protected from the elements by a standard equipped ROPS/FOPS canopy or an optional climate-controlled ROPS/FOPS cab with hinged glass windows.
- Cab configurations can be upgraded to a deluxe high back air-ride seat to enhance operator comfort.
Safety Features
- Angled steps, handrails, and an antiskid surface help provide stability during entry and exit of the operator station.
- Internal and external mirrors are available to provide the operator with a broad view of the jobsite.
- Enhance visibility with an optional rear vision camera with large color touchscreen display for more complete operator control and safety.
- Optional operator presence seat sensor and seat belt switch.
Excellent Compaction Performance
- Exclusive eccentric weight design provides high reliability, smooth performance and low noise with a 3-year, 3000-hour maintenance interval.
- High static linear loads and amplitudes.
- The Auto-vibe function makes it easy to ensure consistent, high-quality compaction.
- Increase machine versatility with the addition of an oval or square padfoot shell kit, allowing your smooth drum machine to compact semi-cohesive and cohesive materials.
- An optional MicroVibe™ drum configuration provides a lower range of amplitude than the standard drum for vibration-sensitive applications.
Enhance Quality and Productivity with Technology
- Optional Cat Compact technologies help you consistently meet compaction targets faster, more uniformly, and in fewer passes – saving on fuel and reducing rework and material costs.
- Exclusive Machine Drive Power (MDP) is an energy-based measurement and can be used on all soil types in either static or vibratory mode.
- Compaction Meter Value (CMV) is an accelerometer-based measurement for granular soils, measuring only when the vibratory system is active.
Virtually Maintenance Free
- Maintenance-free hitch with sealed-for-life bearings.
- Ground-level access to all maintenance points for easy service and fluid sampling.
- Monitor fluid conditions with regular sampling to help extend change intervals up to 500 hours engine oil, 3000 hours eccentric housing and hydraulic oil, and 12000 hours coolant.
- Extended maintenance intervals not only reduce downtime but decrease the amount of fluid and filters that are replaced over the life of the machine.
- VisionLink® takes the guesswork out of managing your entire fleet–regardless of size or equipment manufacturer*–by providing maintenance needs, machine hours, location, fuel usage, idle time, diagnostic codes, and more through interactive dashboards on your mobile device or desktop, helping you make informed decisions that lower costs, simplify maintenance, and improve safety and security on your jobsite.
- Remote Flash allows you to update onboard software without a technician being present, allowing you to initiate software updates when convenient, increasing your overall operating efficiency**
- Remote Troubleshoot allows your Cat dealer to perform diagnostic testing on your connected machine remotely**
* Data field availability can vary by equipment manufacturer and is provided through an application programming interface (API).
** Must be within cell range coverage.
Sustainability
- The Cat C3.6 is available in configurations that meet U.S. EPA Tier 4 Final, EU Stage V and Korea Stage V emission standards.
- Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels* up to: 20% biodiesel FAME (fatty acid methyl ester) or 100% renewable diesel, HVO (hydrotreated vegetable oil) and GTL (gas-to-liquid) fuels Refer to guidelines for successful application. Please consult your Cat dealer or "Caterpillar Machine Fluids Recommendations" (SEBU6250) for details.
*Tailpipe greenhouse gas emissions from lower-carbon intensity fuels are essentially the same as traditional fuels. - Auto engine idle shutdown helps reduce unnecessary fuel burn and greenhouse gas emissions by allowing the engine to automatically go into idle mode when the machine is not working.
- A well-trained operator is worth the investment. Skilled operators benefit your bottom line by maximizing productivity, avoiding costly downtime, and maintaining jobsite safety - which can help to improve fuel efficiency and reduce greenhouse gas emissions.
- Extended maintenance intervals not only reduce downtime but can decrease the amount of fluid and filters that are replaced over the life of the machine. Extend change intervals up to 500 hours engine oil, 3000 hours eccentric housing and hydraulic oil, and 12000 hours coolant.
- Performance and safety can be augmented with standard and optional cameras that are viewed on in-cab displays.
- Cat Compact technologies help you consistently meet compaction targets faster, more uniformly, and in fewer passes - saving on fuel and reducing rework and material costs.
- Cat Scheduled Oil Sampling (S•O•S℠) Services helps reveal excessive wear, contaminated fluids or other "unseen" issues that can shorten component life. In many cases, you can extend oil and coolant change intervals by using fluid monitoring. Consult your Cat dealer or the machine's operation and maintenance manual for more information.
Standard Equipment
-
NOTE
- Standard and optional equipment may vary. Consult your Cat dealer for details.
-
OPERATOR ENVIRONMENT
- ROPS/FOPS Canopy with Handrails, Floor Mat, Interior Rear View Mirror
- Vinyl Suspension Seat
- Adjustable Tilting Steering Column
- High Visibility 76 mm (3 in) Seat Belt
- 12-volt Power Outlet
- Horn, Backup Alarm
-
VIBRATORY SYSTEM
- Smooth Drum
- Pod-Style Eccentric Weight Housings
- Dual Amplitude, Dual Frequency
- Auto-vibe Function
- Rear Adjustable Steel Scraper
-
TECHNOLOGY SOLUTIONS
- VisionLink®
- Remote Flash
- Remote Troubleshoot
- Remote Disable
-
POWERTRAIN
- Cat® C3.6 Engine
- Single Propel Pump
- Fuel Filter, Water Separator, Priming Pump, Water Indicator
- Radiator/Hydraulic Oil Cooler
- Dual Braking System
- Two-Speed Hydrostatic Transmission
- Limited Slip Differential
-
ELECTRICAL
- 12 volt Electrical System
- 150 ampere Alternator
- 900 Cold-cranking Amps Battery Capacity
- Battery Disconnect Switch
-
OTHER
- Sight Gauges for Hydraulic Oil Level and Radiator Coolant Level
- S·O·S℠ Sampling Values: Engine Oil, Hydraulic Oil, and Coolant
- Working Lights (2 Forward, 2 Rear)
Optional Equipment
-
NOTE
- Standard and optional equipment may vary. Consult your Cat dealer for details.
-
OPERATOR ENVIRONMENT
- ROPS/FOPS Cab with Climate Control, Floor Mat, Exterior Rear View Mirrors
- Deluxe High-back Air-ride Seat (Cab)
- Sun/Debris Shields (Canopy)
- Roll-down Sun Screen (Cab)
- Interior Rear View Mirror (Cab)
- Exterior Rear View Mirrors (Canopy)
- Rear View Camera with Color Touchscreen Display
- Seat Belt Switch
- Sound Reduction Kit
-
VIBRATORY SYSTEM
- Removable Shell Kit - Oval or Square Pads
- MicroVibe™
- Dual Adjustable Steel Scrapers
- Dual Adjustable Polyurethane Scrapers
-
TECHNOLOGY SOLUTIONS
- Measure - Machine Drive Power (MDP)
- Measure - Compaction Meter Value (CMV)
- Machine Speed Sensor
-
POWERTRAIN
- Transmission Guard
-
OTHER
- High Ambient Temperature Oil Factory Fill
- Flotation Tread or Lug Tread Tires
- Upgraded Lighting Package (4 Forward, 4 Rear)
- Amber Rotating Beacon
