140 / 140 AWD - Tier 4 / Stage V

140 / 140 AWD - Tier 4 / Stage V

The Cat® 140 Motor Grader gives you more precise grading in a comfortable cab. With a range of technology options, you can improve grading accuracy and save on materials. With extended maintenance intervals, the 140 Motor Grader sets the pace for low operating costs, while maintaining productivity and efficiency.

Net Power Range (Tier 4) 179 hp 133 kW
Operating Weight - Typically Equipped 42647 lb 19344 kg
Blade Width 12 ft 3.7 m

Technicial Specifications

Engine
Net Power Range (Tier 4) 179 hp 133 kW
Engine Model Cat® C9.3 Cat® C9.3
Bore 4.5 in 115 mm
Stroke 5.9 in 149 mm
Speed at Rated Power 2,000 rpm 2,000 rpm
Standard Capability 109 °F 43 °C
Maximum Torque - VHP Plus 840 lb/ft 1138 N·m
VHP Plus - Gear - Net Power - Reverse 3rd-6th 200 hp 149 kW
VHP Plus - Gear - Net Power - Forward 2nd 189 hp 141 kW
VHP Plus - Gear - Net Power - Forward 5th 215 hp 160 kW
VHP Plus - Gear - Net Power - Forward 3rd 200 hp 149 kW
VHP Plus - Gear - Net Power - Forward 8th 231 hp 172 kW
Torque Rise 38% 38%
VHP Plus - Gear - Net Power - Reverse 2nd 189 hp 141 kW
VHP Plus - Gear - Net Power - Forward 1st 179 hp 133 kW
VHP Plus - Gear - Net Power - Forward 6th 220 hp 164 kW
VHP Plus - Gear - Net Power - Reverse 1st 179 hp 133 kW
VHP Plus Range - Net 133-172 kW (179-231 hp) 133-172 kW (179-231 hp)
Emissions U.S. EPA Tier 4 Final/EU Stage V U.S. EPA Tier 4 Final/EU Stage V
VHP Plus - Gear - Net Power - Forward 7th 225 hp 168 kW
VHP Plus Range - Net - Metric 133-172 kW (181-234 hp) 133-172 kW (181-234 hp)
VHP Plus - Gear - Net Power - Forward 4th 210 hp 156 kW
Base Power (1st Gear) - Net - Metric 181 hp 133 kW
High Ambient - Fan Speed - Standard 1,400 rpm 1,400 rpm
Displacement 567.5 in³ 9.3 l
Number of Cylinders 6 6
Derating Altitude 10000 ft 3050 m
High Ambient - Fan Speed - Maximum 1,550 rpm 1,550 rpm
High Ambient - Fan Speed - Minimum 500 rpm 500 rpm
High - Ambient Capability 122 °F 50 °C
Weights
Operating Weight - Typically Equipped 42647 lb 19344 kg
Gross Vehicle Weight - Maximum - Front Axle 17075 lb 7745 kg
Gross Vehicle Weight - Maximum - Rear Axle 38069 lb 17268 kg
Operating Weight - Typically Equipped - Front Axle 12055 lb 5468 kg
Operating Weight - Typically Equipped - Rear Axle 30592 lb 13876 kg
Gross Vehicle Weight - Base - Front Axle 9343 lb 4238 kg
Gross Vehicle Weight - Base - Rear Axle 28077 lb 12736 kg
Gross Vehicle Weight - Maximum - Total 55144 lb 25013 kg
Gross Vehicle Weight - Base - Total 37420 lb 16974 kg
Operating Weight - Typically Equipped - Total 42647 lb 19344 kg
Moldboard
Blade Width 12 ft 3.7 m
Moldboard - Height 24 in 610 mm
Moldboard - Thickness 0.87 in 22 mm
Arc Radius 16.3 in 413 mm
Throat Clearance 6.5 in 166 mm
Cutting Edge Width 6 in 152 mm
Cutting Edge Thickness 0.6 in 16 mm
End Bit - Width 6 in 152 mm
End Bit - Thickness 0.6 in 16 mm
Blade Pull - Base GVW 25269 lb 11462 kg
Blade Pull - Maximum GVW 34262 lb 15541 kg
Blade Down Pressure - Base GVW 16038 lb 7275 kg
Blade Down Pressure - Maximum GVW 29309 lb 13294 kg
Moldboard - Blade Width 12 ft 3.7 m
Operating Specifications
Top Speed - Forward 29 mile/h 46.6 km/h
Top Speed - Reverse 23 mile/h 36.8 km/h
Turning Radius - Outside Front Tires 25.59 ft 7.8 m
Steering Range - Left/Right 50° 50°
Articulation Angle - Left/Right 20° 20°
Forward - 1st 2.5 mile/h 4.1 km/h
Forward - 2nd 3.4 mile/h 5.5 km/h
Forward - 3rd 5 mile/h 8 km/h
Forward - 4th 6.9 mile/h 11 km/h
Forward - 5th 10.6 mile/h 17.1 km/h
Forward - 6th 14.5 mile/h 23.3 km/h
Forward - 7th 19.9 mile/h 32 km/h
Forward - 8th 29 mile/h 46.6 km/h
Reverse - 1st 2 mile/h 3.2 km/h
Reverse - 2nd 3.7 mile/h 6 km/h
Reverse - 3rd 5.4 mile/h 8.7 km/h
Reverse - 4th 8.4 mile/h 13.5 km/h
Reverse - 5th 15.7 mile/h 25.3 km/h
Reverse - 6th 23 mile/h 36.8 km/h
Service Refill
Fuel Capacity 104 gal (US) 394 l
Cooling System 15 gal (US) 57 l
Hydraulic System - Total 26.4 gal (US) 100 l
Hydraulic System - Tank 16.9 gal (US) 64 l
Diesel Exhaust Fluid 5.8 gal (US) 22 l
Transmission - Differential - Final Drives 18.5 gal (US) 70 l
Engine Oil 7.9 gal (US) 30 l
Tandem Housing - Each 20 gal (US) 76 l
Front Wheel Spindle Bearing Housing 0.13 gal (US) 0.5 l
Circle Drive Housing 1.8 gal (US) 7 l
Power Train
Forward/Reverse Gears 8 Forward/6 Reverse 8 Forward/6 Reverse
Transmission APECS, Direct Drive, Powershift APECS, Direct Drive, Powershift
Brakes - Service Multiple Oil Disc Multiple Oil Disc
Brakes - Service - Surface Area 3565 in² 23000 cm²
Brakes - Parking Multiple Oil Disc Multiple Oil Disc
Brakes - Secondary Dual Circuit Dual Circuit
Hydraulic System
Circuit Type Parallel Parallel
Pump Type Variable Piston Variable Piston
Pump Output 55.7 gal/min 210 l/min
Maximum System Pressure 3500 psi 24150 kPa
Reservoir Tank Capacity 16.9 gal (US) 64 l
Standby Pressure 885 psi 6100 kPa
Frame
Drawbar - Width 3 in 76.2 mm
Circle - Diameter 60.2 in 1530 mm
Circle - Blade Beam Thickness 1.6 in 40 mm
Drawbar - Height 6 in 152 mm
Front Frame Structure - Height 12.6 in 321 mm
Circle - Height 5.4 in 138 mm
Front Frame Structure - Width 12 in 305 mm
Drawbar - Thickness 0.5 in 12.7 mm
Front-Top/Bottom Plate - Width 12 in 305 mm
Front-Top/Bottom Plate - Thickness 0.87 in 22 mm
Front Axle - Height to Center 23.5 in 596 mm
Front Axle - Wheel Lean - Left/Right 18° 18°
Front Axle - Total Oscillation per Side 32° 32°
Blade Range
Circle Centershift - Right 28.7 in 728 mm
Circle Centershift - Left 27.4 in 695 mm
Moldboard Sideshift - Right 26 in 660 mm
Moldboard Sideshift - Left 20.1 in 510 mm
Maximum Blade Position Angle 90° 90°
Blade Tip Range - Forward 40° 40°
Blade Tip Range - Backward 5° 5°
Maximum Shoulder Reach Outside of Tires - Right 77.9 in 1978 mm
Maximum Shoulder Reach Outside of Tires - Left 70.5 in 1790 mm
Maximum Lift Above Ground 18.9 in 480 mm
Maximum Depth of Cut 28.1 in 715 mm
Ripper
Ripping Depth - Maximum 16.8 in 426 mm
Ripper Shank Holder Spacing 21 in 533 mm
Ripper Shank Holders 5 5
Penetration Force 20812 lb 9440 kg
Pry-Out Force 27794 lb 12607 kg
Machine Length Increase, Beam Raised 40.6 in 1031 mm
Scarifier
Front, V-Type, 5 or 11 Tooth - Scarifier Shank Holder Spacing 4.6 in 116 mm
Front, V-Type, 5 or 11 Tooth - Scarifying Depth, Maximum 18.4 in 467 mm
Mid, V-Type - Scarifier Shank Holders 11 11
Rear - Scarifying Depth, Maximum 16.8 in 426 mm
Front, V-Type, 5 or 11 Tooth - Working Width 40.6 in 1031 mm
Front, V-Type - Working Width 47.4 in 1205 mm
Mid, V-Type - Working Width 46.6 in 1184 mm
Mid, V-Type - Scarifying Depth, Maximum 11.5 in 292 mm
Mid, V-Type - Scarifier Shank Holder Spacing 4.6 in 116 mm
Front, V-Type, 5 or 11 Tooth - Scarifier Shank Holders 5/11 5/11
Rear - Working Width 84 in 2133 mm
Rear - Scarifier Shank Holders 9 9
Rear - Scarifier Shank Holder Spacing 10.5 in 267 mm
Standards
Brakes ISO 3450 ISO 3450
Sound ISO 6394; ISO 6395 ISO 6394; ISO 6395
Steering ISO 5010 ISO 5010
ROPS/FOPS ISO 3471/ISO 3449 ISO 3471/ISO 3449
Air Conditioning System
Air Conditioning The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a or R1234yf. See the label or instruction manual for identification of the gas. The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a or R1234yf. See the label or instruction manual for identification of the gas.
Tandems
Height 19.9 in 506 mm
Width 7.9 in 201 mm
Sidewall Thickness - Inner 0.63 in 16 mm
Sidewall Thickness - Outer 0.71 in 18 mm
Drive Chain Pitch 2 in 50.8 mm
Wheel Axle Spacing 60 in 1523 mm
Tandem Oscillation - Front Up 15° 15°
Tandem Oscillation - Front Down 25° 25°
Dimensions
Height - Top of Cab 130 in 3308 mm
Length - Counterweight to Ripper 399 in 10136 mm
Width - Outside Front Tires 98.9 in 2511 mm
Length - Front Axle to Mid Tandem 241 in 6123 mm
Length - Front Tire to Rear of Machine 351 in 8912 mm
Length - Front Axle to Moldboard 100 in 2552 mm
Length - Between Tandem Axles 60 in 1523 mm
Width - Outside Rear Tires 98.9 in 2511 mm
Width - Tire Center Lines 84.3 in 2140 mm
Height - Front Axle Center 23.5 in 596 mm
Height - Exhaust Stack 128 in 3256 mm
Height - Top of Cylinders 120 in 3040 mm
Ground Clearance - Rear Axle 13.3 in 339 mm

Advantages and Features

BETTER COMFORT AND CONTROL

  • Visibility is key to your safety, efficiency and quality of work. The motor grader delivers with angled cab doors, tapered engine enclosure and a sloped rear window make it easy to see the moldboard and tires, as well as behind the machine. Optional rear camera further enhances lines of sight.
  • The most comfortable cab in the industry.
  • Joystick controls reduce hand and arm movement by 78%, which helps to lower operator fatigue.
  • Easy-reach rocker and control switches
  • Standard Cat Comfort Series suspension seat.
  • Control pods adjust electronically - easy to set ideal operating position.
  • Isolation mounts reduce sound and vibration for more relaxed environment.
  • High capacity Heating, Ventilation and Air Conditioning (HVAC) system dehumidifies and pressurizes the cab, circulates fresh air, seals out dust and keeps windows clear.
  • Optional deluxe radio with CD features MP3 and Bluetooth technology.
  • In-dash instrument cluster houses easily read, high-visibility gauges and warning lamps keep you aware of critical system information.
  • Two electro-hydraulic joysticks make operation easy and comfortable. Adjustable control pods ensure they are positioned for optimal comfort, visibility and operation.
  • Joystick Functions -
  1. Left joystick controls steering, articulation, return-to-center, wheel lean, gear selection, left moldboard lift cylinder and float.
  2. Right joystick controls drawbar, circle and moldboard functions as well as electronic throttle control and manual differential lock/unlock. Joystick lean angle mirrors the steer tires' turning angle.
  • Brake tensioning system holds the joystick in position until the operator moves it.
  • Steering control automatically reduces steering sensitivity at higher ground speeds for predictable control.
  • Infinitely variable roller switches control the rear ripper and/or front lift group (when equipped).
  • Proven load-sensing and advanced electro-hydraulics give you superior implement control and responsive hydraulic performance that makes operators' jobs easier.
  • Continuously matching hydraulic flow/pressure to power demands reduces heat and optimizes power.
  • Proportional Priority Pressure-Compensating (PPP-C) valves have different flow rates for the head and rod ends of the cylinder, so you can count on consistent, predictable implement response.
  • Hydraulic flow is proportioned to give you confidence that all implements operate simultaneously without slowing engine or implement speed.
  • Blade Float allows the blade to move freely under its own weight.
  • Float both cylinders, to allow blade can follow the contours of the ground.
  • Float one cylinder to permit the toe of the blade to follow a hard surface while the operator controls slope with the other cylinder.
  • Large, independent hydraulic oil supplies prevent cross-contamination and provide proper cooling, reducing heat build-up and extending component life.
  • Cat XT™ hose allows high pressures for maximum power and reduced downtime.
  • Articulation Return-to-Center automatically returns the machine to a straight frame position from any angle with the touch of a button.
  • Choose the blade lift modulation mode that best fits your application or operating style: fine, normal, or coarse.

PERFORMANCE AND PRODUCTIVITY

        
  • Cat C9.3 engine delivers the performance you need to maintain consistent grading speeds for maximum productivity.
    •     
  • Engine technology reduces emissions, lowers combustion chamber temperatures and optimizes combustion to generate more work output from every unit of fuel.
    •     
  • Hydraulic demand fan automatically adjusts according to engine cooling requirements. When cooling demand is reduced, you benefit from more power to the ground and improved fuel efficiency.
    •     
  • Electronic Throttle Control improves productivity providing the best match of power and torque for the demands of each application.* Engine Idle Shutdown feature can be software-enabled by your Cat dealer to shut down the engine after a set period of time to save you fuel and help reduce emissions.
    •     
  • Optional Reversing Fan helps clear debris from cooling system without need to stop the machine from work.
    •     
  • Standard Automatic Differential Lock/Unlock unlocks the differential during a turn and re-locks when straight for easier operation and to help protect the power train.
    •     
  • Full Electronic Clutch Pressure Control system optimizes inching modulation for smooth shifts and directional changes, reducing stress on gears.
    •     
  • Programmable AutoShift option simplifies operation by allowing the operator to program the transmission to shift at optimal points to match each application.
    •     
  • Eco mode can save fuel by reducing engine speed so the machine works in a more efficient range. 
    •     
  • Power Shift Countershaft Transmission is matched to the Cat engine to maximize power to the ground.
    •     
  • Engine Over-Speed Protection prevents downshifting until an acceptable safe travel speed has been established.
    •     
  • All Wheel Drive (AWD) transfers power to the ground as needed, allowing you to work more efficiently with mud, gravel, sand and snow. Increased traction reduces slippage across the cross slope.
    •     
  • Sealed spindle keeps front axle bearings lubricated and protected from contaminants. Cat “Live Spindle” design places the larger tapered roller bearing on the outside, where the load is greater, extending life.
    •     
  • Bolt-on modular rear axle improves serviceability and contamination control with easy access to differential components.
    •     
  • Oil-bath, multi-disc service brakes are hydraulically actuated for smooth, predictable braking and lower operating costs. Brakes are located at each tandem wheel and have a large total brake surface area to provide dependable stopping power and longer life.

HEAVY DUTY CONSTRUCTION

  • One-piece forged steel circle stands up to high stress loads, and a sacrificial wear system helps keep your service time and costs down.
  • Articulation hitch features a large tapered roller bearing to carry loads evenly. The bearing is sealed preventing contamination and a locking pin prevents articulation during service or transport.
  • Drawbar, circle and moldboard are designed to make it easy for you to keep the components tight.
  • Shims and patented top-adjust wear strips are easy to add or replace, dramatically reducing downtime.
  • Nylon composite wear inserts maximize circle torque and component life.
  • Sacrificial brass wear strips between the blade mounting group and moldboard can be easily adjusted and replaced.
  • Shim less Moldboard Retention System uses vertical and horizontal adjusting screws to keep moldboard wear strips aligned for reduced blade chatter and precise control.
  • With an aggressive blade angle, optimized moldboard curvature and large throat clearance, you work more efficiently by allowing material to roll more freely along the blade.
  • Heat-treated rails, hardened cutting edges and end bits, and heavy duty bolts provide greater moldboard reliability and long service life.
  • Link bar allows extreme moldboard positioning for easier bank sloping and ditch cutting/cleaning.

TECHNOLOGY THAT GETS WORK DONE

  • Grade technologies combine digital design data, in-cab guidance, and automatic blade controls to enhance grading accuracy, reduce rework, and lower costs related to production earthmoving and rough, fine and finish grade applications.
  • Cat Grade with Cross Slope is an optional, fully integrated, factory installed system that helps operators maintain desired cross slope by automatically controlling one side of the blade. System is job-ready from day one, and scalable for the future with upgrade kits that provide additional 2D and/or 3D control.
  • Attachment Ready Option can be ordered as a factory- or dealer-installed option. Includes built-in mounting points and internal wiring, to facilitate installation of grade control system.
  • Cat Grade uses positioning and guidance technologies, machine sensors, and automatic blade control to help operators get to grade faster, easier and more efficiently.
  • In-cab guidance gives operators detailed information to work confidently and achieve greater accuracy, in fewer passes, using less material.
  • Operators can stay on grade and improve productivity and accuracy by nearly 50 percent over conventional methods.
  • Grade stakes and checkers are minimized, helping to make the work site safer and more cost effective.
  • Grade technologies include Cross Slope, Sonic, Laser, GPS, and/or Universal Total Station (UTS).
  • Cat Product Link™ takes guesswork out of equipment management with remote monitoring capabilities for one machine or an entire fleet.
  • Manage your fleet of machines while reducing fuel burn with Cat Production Measurement System option. The Efficiency Coach and Application Segmentation work together to monitor operators and machines simultaneously. Measure your jobsite’s efficiency and productivity from anywhere on the website.
  • Tracks asset location, hours, fuel usage, diagnostic codes, idle time and more through the secure VisionLink™ user interface.
  • Smart Machine Systems enhance productivity -
  1. Cat Messenger, combined with full systems integration, enhances diagnostic capability for quick analysis of critical data.
  2. Electronic Technician (Cat ET) lets service technicians access stored diagnostic data and configure machine parameters through the Cat Data Link.
  3. Low Battery Elevated Idle raises idle speed when low system voltage is detected, ensuring adequate system voltage and improving battery reliability.
  4. Automatic Engine Deration protects the engine by automatically lowering engine torque output and alerting the operator if critical conditions are detected.

BUILT-IN SAFETY FEATURES

  • Operator Presence Monitoring System keeps the parking brake engaged and hydraulic implements disabled until the operator is seated and the machine is ready for operation.
  • Speed Sensitive Steering makes steering less sensitive as ground speed increases for enhanced control.
  • Secondary electric hydraulic steering pump automatically engages in case of a drop in steering pressure allowing operator to steer the machine to a stop.
  • Hydraulic lockout disables all implement functions while still providing machine steering control. This is especially useful while roading.
  • Brakes are located at each tandem wheel to eliminate braking loads on the power train. Redundant brake systems utilize accumulators to enable stopping in case of machine failure.
  • Perforated steel tandem walkways and convenient grab rails provide a sturdy platform when moving on, off and around the machine.
  • Circle Drive Slip Clutch protects the drawbar, circle and moldboard from shock loads if the blade encounters an immovable object and reduces the possibility of abrupt directional changes in poor traction conditions.
  • Blade Lift Accumulators absorb impact loads by allowing vertical blade travel. This optional feature reduces wear and impact loading for enhanced operator safety.
  • Safety Features -
  1. Optional rearview camera with in-cab monitor
  2. Grouped, ground level service points
  3. Laminated front window glass
  4. Optional LED Lighting
  5. Ground-level electrical disconnect switch
  6. Ground-level engine shutoff switch
  7. Anti-glare paint eases night operation
  8. Front and rear fenders

TOP-TIER SERVICE AND SUPPORT

  • Cat motor graders are designed to help you increase uptime and reduce costs:
  • Grouped service points and extended service intervals save maintenance time.
  • New optional LED lights in the left hand compartment facilitates machine servicing in low light.
  • Your Cat dealer provides support that is second to none. From machine selection and purchase to training, maintenance support and rebuilds, Cat dealers have the experience and capabilities to help keep you up and running.

SUSTAINABILITY

  • The Cat® C9.3 engine meets U.S. EPA Tier 4 Final and EU Stage V emission standards.
  • Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels up to: 20% biodiesel FAME (fatty acid methyl ester) * or 100% renewable diesel, HVO (hydrotreated vegetable oil) and GTL (gas-to-liquid) fuels. Refer to guidelines for successful application. Please consult your Cat dealer or “Caterpillar Machine Fluids Recommendations” (SEBU6250) for details.
  • Engine Idle Shutdown Timer reduces fuel burn, greenhouse gas emissions and unnecessary idle time by shutting down the machine after a pre-set idling period.
  • Cat® Grade helps reduce fuel burn and greenhouse gas emissions by enabling you to achieve grade faster and more accurately by automating blade actions.
  • Extended maintenance intervals not only reduce downtime but decrease the amount of fluid and filters that are replaced over the life of the machine.
  • VisionLink® displays the CO2 emissions for monitored assets, calculated by fuel type for the Runtime Fuel Burned each day in a selected date range.
  • Don't waste fuel idling. Cat VisionLink® online fleet monitoring helps you manage idle time and reduce fuel burn and greenhouse gas emissions.
  • Cat® Reman parts are a sustainable choice. New Cat parts are designed with the potential to have more than one life, so Cat Reman parts are truly remanufactured — not just repaired, rebuilt or reconditioned. Because the process ensures the latest design changes are incorporated into Cat Reman parts, you get like new quality and outstanding performance at lower cost.
*Engines with no aftertreatment devices can use higher blends, up to 100% biodiesel (for use of blends higher than 20% biodiesel, consult your Cat dealer).

Standard Equipment

  • NOTE
    • Standard and optional equipment may vary. Consult your Cat dealer for details.
  • POWER TRAIN
    • Air cleaner, dual stage, dry type, diesel, with automatic engine derate and automatic dust ejector, service indicator through Cat Messenger
    • Air-to-air after cooler (ATAAC)
    • Belt, serpentine, automatic tensioner
    • Brakes, oil disc, four-wheel, hydraulic
    • Demand fan, hydraulic, swing-out
    • Diesel exhaust fluid tank, 22.0 L (5.8 gal) ground level access, and sediment drain
    • Differential Lock/Unlock, Automatic
    • Drain, engine oil, ecology
    • Economy mode
    • Electronic over speed protection
    • Engine C9.3 U.S. EPA Tier 4 Final/EU Stage V emission standards
    • Fuel tank, 394 L (104 gal), ground level access and sediment drain
    • Parking brake - multi-disc, sealed, oil-cooled
    • Priming pump, fuel
    • Rear axle, modular
    • Sediment drain, fuel tank
    • Tandem drive
    • Transmission, 8F/6R, powershift, direct drive, Advanced Productivity Electronic Control Strategy (APECS)
  • ELECTRICAL
    • Alarm, back up
    • Alternator, 150 ampere, sealed
    • Batteries, maintenance free, heavy duty, 1125 CCA
    • Breaker panel, ground accessible
    • Cab harness and electrical hydraulic valves
    • Electrical system, 24V
    • Grade Control Ready - Cab harness, software, electrical hydraulic valves, bosses and brackets
    • Lights, roof-mounted roading, reversing, LED stop and tail
    • Product Link
    • Starter, electric
  • OPERATOR ENVIRONMENT
    • Accelerator
    • Air conditioning with heater
    • Arm and wrist rest, electronically adjustable
    • Articulation, automatic Return-to-Center
    • Cat Messenger operator information system
    • Centershift pin indicator
    • Coat hook
    • Cup holder
    • Display, digital speed and gear
    • Doors, left and right side with wiper
    • Gauge, machine level
    • Gauge cluster (analog) - fuel, articulation, engine coolant temp, engine RPM, hydraulic oil temp, regen, DEF
    • Hour meter, digital
    • Joystick hydraulic controls right/left blade lift with float position, circle drive, blade sideshift and tip, centershift, front wheel lean, articulation and power steering
    • Joystick, adjustable armrests
    • Joystick gear selection
    • Joystick hydraulic power steering
    • Ladders, cab, left and right side
    • Lights, night time cab
    • Mirror, inside rearview, wide angle
    • Power port, 12V
    • Radio Ready, Entertainment
    • ROPS cab, sound suppressed 70 dB(A)
    • Seat, cloth-covered, comfort suspension
    • Seat belt, retractable 76 mm (3 in)
    • Storage area for cooler/lunchbox
    • Throttle control, electronic
    • Windows, laminated glass: - fixed front with intermittent wiper - door with intermittent wipers (3)
    • Windows: tempered: - left and right side wipers - rear and intermittent wiper
  • FLUIDS
    • Antifreeze
    • Extended Life Coolant to -35° C (-30° F)
  • TIRES, RIMS AND WHEELS
    • Partial allowance for tires on 254 — 607 mm (10 — 24 in) multi-piece rims is included in the base machine price and weight
  • OTHER STANDARD EQUIPMENT
    • Accumulators, brake, dual certified
    • Anti-glare paint
    • Bumper, rear, integrated with hitch
    • CD ROM Parts Book
    • Clutch, circle drive slip
    • Cutting edges: - 152 — 16 mm (6 — 5/8 in) - curved DH-2 steel - 19 mm (3/4 in) mounting bolts
    • Doors (3), engine compartment, locking
    • Drawbar - 6 shoes, replaceable wear strips
    • Electrical hydraulic valves, hydraulic lines for base 8 functions
    • Endbits: - 16 mm (5/8 in) DH-2 steel - 19 mm (3/4 in) mounting bolts
    • Fluid check, ground level
    • Frame, articulated, with safety lock
    • Ground level engine shutdown
    • Hammer (emergency exit)
    • Horn, electric
    • Hydraulic lines for base functions
    • Lockout, hydraulic implement (for roading and servicing)
    • Moldboard
    • Mounting, cab roof accessories
    • Pump, hydraulic, high capacity, 98 cm³ (6 in³)
    • Radiator, cleanout access (both sides with swing doors)
    • Secondary steering
    • Serviceability, LH side
    • S·O·S ports: engine, hydraulic, transmission, coolant, fuel
    • Tandem walkway/guards
    • Tool box

Optional Equipment

  • NOTE
    • Standard and optional equipment may vary. Consult your Cat dealer for details.
  • ELECTRICAL
    • Alternator, 280 ampere
    • Batteries: extreme duty, 1,400 CCA
    • Lights: Headlights, high
    • Lights: Headlights, low
    • Lights: Working lights, basic
    • Lights: Working lights, plus, LED
    • Lights: Warning: beacon or strobe
    • Lights: Mounting for warning light
  • GUARDS
    • Articulation guard
    • Fenders, front
    • Fenders, rear
    • Front axle guard
    • Sound suppression (bottom)
    • Sound suppression (enclosure)
    • Transmission
  • OPERATOR ENVIRONMENT
    • Mirrors, outside: heated 24V
    • Mirrors, outside: mounted
    • Comfort Plus Arrangement
    • Comfort Premium Arrangement
  • POWER TRAIN
    • All Wheel Drive
    • Precleaner, snow
    • Starter, extreme duty, 1,000 Amps
    • Transmission, autoshift
  • OTHER ATTACHMENTS
    • Attachment Ready Option (ARO)
    • Integrated cross slope
    • Accumulators, blade lift
    • Camera, rearview
    • Cat Product Link 321SR
    • Cat Product Link 522
    • Drain, ecology, engine Wiggins
    • Heater, engine coolant: 120V
    • Heater, engine coolant: 240V
    • Hydraulic arrangements with one or more additional hydraulic valves are available for rear ripper, dozer, snow plow and snow wing.
    • Snow wing mounting, frame ready
    • Starting aid, ether
    • Reversing fan, automatic or manual
    • Cat Grade with 3D
  • WORK TOOLS/G.E.T.
    • Blade extension, left hand, 610 mm (2 ft)
    • Blade extension, right hand, 610 mm (2 ft)
    • Counterweight
    • Cutting edges, curved
    • Endbits, overlay
    • Front lift group, mounting
    • Front lift group, mechanical
    • Grader bit, narrow and super penetration
    • Mid-Mount Scarifier, Package
    • Moldboard: 4267 mm — 610 mm — 22 mm (14 ft — 24 in — 7/8 in)
    • Moldboard: 4267 mm — 686 mm — 25 mm (14 ft — 27 in — 1 in)
    • Push plate
    • Ripper, rear
    • Ripper tooth
    • Scarifier, front
    • Snow Arrangement
    • Snow Wing Ready Package
    • Tow hitch
  • MACHINE ARRANGEMENTS
    • Canadian Arrangement
    • European Arrangement
    • TUV Roading Arrangement
  • OPTIONAL TIRE ARRANGEMENTS
    • Rim Size - 9 × 24; Wheel Group - Single-Piece; Tires - 14.0R24
    • Rim Size - 13 × 25; Wheel Group - Single-Piece; Tires - 17.5R25
    • Rim Size - 10 × 24; Wheel Group - Multi-Piece; Tires - 14.0R24
    • Rim Size - 10 × 24; Wheel Group - Multi-Piece; Tires - 14.0-24
    • Rim Size - 14 × 25; Wheel Group - Multi-Piece; Tires - 17.5R25
    • Rim Size - 14 × 25; Wheel Group - Multi-Piece; Tires - 17.5-25
    • Note: Consult your dealer for individual tire width, size and brand.