Technicial Specifications
| Nominal Payload Class (100%) | 42.1 ton (US) 38.2 t |
| Top Speed - Loaded | 45.8 mile/h 73.7 km/h |
| Target Payload (100%) | 42.1 ton (US) 38.2 t |
| Maximum Working Payload (110%) | 46.3 ton (US) 42 t |
| Maximum Allowable Payload (120%)* | 50.5 ton (US) 45.8 t |
| Body Capacity - SAE 2:1 | 32.9 yd³ 25.2 m³ |
| Note (1) | *Refer to Caterpillar 10/10/20 Payload Policy for maximum gross machine weight limitations. *Refer to Caterpillar 10/10/20 Payload Policy for maximum gross machine weight limitations. |
| Note (2) | Target payload and capacity based on Dual Slope body with no liner. Attachment selection will affect payload and maximum gross machine operating weight. Target payload and capacity based on Dual Slope body with no liner. Attachment selection will affect payload and maximum gross machine operating weight. |
| Engine Model | Cat® C15 Cat® C15 |
| Rated Engine Speed | 1700 r/min 1700 r/min |
| Gross Power - SAE J1995 | 515 hp 384 kW |
| Net Power - SAE J1349 | 477 hp 356 kW |
| Net Power - ISO 9249 | 477 hp 356 kW |
| Net Power - 80/1269/EEC | 489 hp 365 kW |
| Net Power - ISO 14396 | 508 hp 379 kW |
| Net Torque - SAE J1349 | 1834 ft·lbf 2486 N·m |
| Number of Cylinders | 6 6 |
| Bore | 5.4 in 137 mm |
| Stroke | 6.7 in 171 mm |
| Displacement | 927.6 in³ 15.2 l |
| Note (1) | Power rating applies at 1,700 rpm when tested under the specified condition for the specified standard. Power rating applies at 1,700 rpm when tested under the specified condition for the specified standard. |
| Note (2) | Ratings based on SAE J1995 standard air conditions of 25° C (77° F) and 100 kPa (29.61 Hg) barometer. Power based on fuel having API gravity of 35 at 16° C (60° F) and an LHV of 42 780 kJ/kg (18,390 BTU/lb) when engine used at 30° C (86° F). Ratings based on SAE J1995 standard air conditions of 25° C (77° F) and 100 kPa (29.61 Hg) barometer. Power based on fuel having API gravity of 35 at 16° C (60° F) and an LHV of 42 780 kJ/kg (18,390 BTU/lb) when engine used at 30° C (86° F). |
| Note (3) | No engine derating required up to 3000 m (9,843 ft) altitude. No engine derating required up to 3000 m (9,843 ft) altitude. |
| Note (4) | Meets Japan Small Volume Exemption. Meets Japan Small Volume Exemption. |
| Emissions | Meets U.S. EPA Tier 4 and EU Stage V emission standards. Meets U.S. EPA Tier 4 and EU Stage V emission standards. |
| Target Gross Machine Operating Weight | 157000 lb 71214 kg |
| Target Gross Machine Weight | 157000 lb 71214 kg |
| Chassis Weight | 55948 lb 25378 kg |
| Body Weight | 17306 lb 7850 kg |
| Note (1) | Chassis weight with 100% fuel, hoist, body mounting group, rims, and tires. Chassis weight with 100% fuel, hoist, body mounting group, rims, and tires. |
| Note (2) | Body weight is the standard Dual Slope body with no liner and will vary depending on configuration. Body weight is the standard Dual Slope body with no liner and will vary depending on configuration. |
| Forward - 1 | 7.4 mile/h 11.9 km/h |
| Forward - 2 | 10.1 mile/h 16.3 km/h |
| Forward - 3 | 13.8 mile/h 22.2 km/h |
| Forward - 4 | 18.5 mile/h 29.8 km/h |
| Forward - 5 | 25.1 mile/h 40.4 km/h |
| Forward - 6 | 33.8 mile/h 54.4 km/h |
| Forward - 7 | 45.8 mile/h 73.7 km/h |
| Reverse | 8.8 mile/h 14.2 km/h |
| Note | Maximum travel speeds with standard 18.00R33 (E4) tires. Maximum travel speeds with standard 18.00R33 (E4) tires. |
| Differential Ratio | 1.92:1 1.92:1 |
| Planetary Ratio | 4.80:1 4.80:1 |
| Total Reduction Ratio | 9.26:1 9.26:1 |
| Brake Surface - Front | 216 in² 1395 cm² |
| Brake Surface - Rear | 6235 in² 40225 cm² |
| Brake Standards | ISO 3450:2011 ISO 3450:2011 |
| Note | Target gross machine operating weight is 71 214 kg (157,000 lb). Target gross machine operating weight is 71 214 kg (157,000 lb). |
| Pump Flow - High Idle | 118 gal/min 448 l/min |
| Relief Valve Setting - Raise | 2750 psi 18950 kPa |
| Relief Valve Setting - Lower | 500 psi 3450 kPa |
| Body Raise Time - High Idle | 7.5 s 7.5 s |
| Body Lower Time - Float | 10 s 10 s |
| Body Power Down - High Idle | 10 s 10 s |
| Struck | 23.01 yd³ 17.6 m³ |
| Heaped (SAE 2:1)* | 32.9 yd³ 25.2 m³ |
| Note (2) | *ISO 6483:1980. *ISO 6483:1980. |
| Note (1) | Contact your local Cat dealer for body recommendation. Contact your local Cat dealer for body recommendation. |
| Struck | 23.01 yd³ 17.6 m³ |
| Heaped (SAE 2:1)* | 32.9 yd³ 25.2 m³ |
| Note (1) | Contact your local Cat dealer for body recommendation. Contact your local Cat dealer for body recommendation. |
| Note (2) | *ISO 6483:1980. *ISO 6483:1980. |
| Front Axle - Empty | 49 % 49 % |
| Front Axle - Loaded | 34 % 34 % |
| Rear Axle - Empty | 51 % 51 % |
| Rear Axle - Loaded | 66 % 66 % |
| Empty Loaded Cylinder Stroke Front | 9.2 in 234 mm |
| Empty Loaded Cylinder Stroke Rear | 5.9 in 149 mm |
| Rear axle - Oscillation | 8.9 ° 8.9 ° |
| Fuel Tank | 140 gal (US) 530 l |
| Cooling System | 33 gal (US) 125 l |
| Crankcase | 17 gal (US) 64 l |
| Differential - Final Drives | 47 gal (US) 180 l |
| Steering Tank | 14.5 gal (US) 55 l |
| Steering System - Including Tank | 23 gal (US) 87 l |
| Brake/Hoist Hydraulic Tank | 38 gal (US) 145 l |
| Brake Hoist System | 60 gal (US) 227 l |
| Torque Converter - Transmission System | 17 gal (US) 64 l |
| DEF Tank | 6 gal (US) 21 l |
| Steering Standards | ISO 5010:2007 ISO 5010:2007 |
| Steer Angle | 40.5 ° 40.5 ° |
| Turning Diameter - Front | 57.7 ft 17.6 m |
| Turning Circle - Clearance Diameter | 66.6 ft 20.3 m |
| Note | Target gross machine operating weight is 71 214 kg (157,000 lb). Target gross machine operating weight is 71 214 kg (157,000 lb). |
| Standard Tire | 18.00R33 (E4) 18.00R33 (E4) |
| Note (1) | Productive capabilities of the 770G truck are such that, under certain job conditions, TKPH (TMPH) capabilities of standard or optional tires could be exceeded and, therefore, limit production. Productive capabilities of the 770G truck are such that, under certain job conditions, TKPH (TMPH) capabilities of standard or optional tires could be exceeded and, therefore, limit production. |
| Note (2) | Caterpillar recommends the customer evaluates all job conditions and consults the tire manufacturer for proper tire selection. Caterpillar recommends the customer evaluates all job conditions and consults the tire manufacturer for proper tire selection. |
| ROPS Standards | Rollover Protective Structure (ROPS) for cab offered by Caterpillar meets ISO 3471:2008 ROPS criteria. Rollover Protective Structure (ROPS) for cab offered by Caterpillar meets ISO 3471:2008 ROPS criteria. |
| FOPS Standards | Falling Objects Protective Structure (FOPS) meets ISO 3449:2005 Level II FOPS criteria. Falling Objects Protective Structure (FOPS) meets ISO 3449:2005 Level II FOPS criteria. |
| Sound Standards (1) | Hearing protection may be needed when operating with open operator station & cab for extended periods or in noisy environment. Hearing protection may be needed when operating with open operator station & cab for extended periods or in noisy environment. |
| Sound Standards (2) | Exterior sound pressure power level for standard machine measured according to tests specified in ISO 6395:2008 is 116 dB(A). Exterior sound pressure power level for standard machine measured according to tests specified in ISO 6395:2008 is 116 dB(A). |
| Sound Standards (3) | Operator Equivalent Sound Pressure Level is 79 dB(A) & 74 dB(A) with EU sound suppression applied when ISO 6396:2008 is used. Operator Equivalent Sound Pressure Level is 79 dB(A) & 74 dB(A) with EU sound suppression applied when ISO 6396:2008 is used. |
| Height - Top of ROPS | 12.7 ft 3857 mm |
| Overall Body Length | 26.8 ft 8199 mm |
| Inside Body Length | 18.5 ft 5635 mm |
| Overall Length | 28.9 ft 8796 mm |
| Wheel Base | 13 ft 3960 mm |
| Rear Axle - Tail | 8.5 ft 2586 mm |
| Ground Clearance | 1.6 ft 518 mm |
| Dump Clearance | 1.7 ft 506 mm |
| Loading Height - Empty | 10.3 ft 3147 mm |
| Inside Body Depth - Maximum | 4.6 ft 1404 mm |
| Overall Height - Body Raised | 27.1 ft 8255 mm |
| Operating Width | 15.7 ft 4780 mm |
| Centerline Front Tire Width | 10.2 ft 3110 mm |
| Engine Guard Clearance | 1.8 ft 335 mm |
| Outside Body Width | 12.9 ft 3931 mm |
| Inside Body Width | 11.9 ft 3627 mm |
| Front Canopy Height | 13.5 ft 4114 mm |
| Rear Axle - Clearance | 1.8 ft 548 mm |
| Centerline of Rear Dual Tire Width | 8.3 ft 2536 mm |
| Overall Tire Width | 12.1 ft 3693 mm |
Advantages and Features
ACHIEVE GREATER PRODUCTIVITY
- Haul your materials faster with an accelerated travel speed.
- Put more power to the ground with increased torque.
- Enjoy greater productivity while using a more responsive Traction
Control System (TCS). - Reduce tire wear with maximum by engaging TCS early in the slip.
- Strong, predictable performance helps operators achieve the lowest cost per ton.
BOOST FUEL EFFICIENCY
- Up to 11% less fuel consumption.
- Advanced Productivity Electronic Control System (APECS) allows the engine and transmission to communicate on a high level. This communication allows the machine to better utilize the power and torque the engine is producing.
- Automatically optimize fuel consumption with the feature—Adaptive Economy mode reduces fuel use without affecting productivity and can be engaged with a single button.
- Gain improvements in fuel efficiency with auto-neutral idle.
- Haul your 770 truck at a more fuel-efficient engine speed and gear selection with speed limiting.
- Conserve fuel with integrated Engine Idle Shutdown by the engine automatically initiating when the truck is in park and idle for a preset amount of time.
DESIGNED FOR SAFETY
- Improvements in accessibility with safe, ground-level access tofuel fill and daily maintenance points.
- Ensure three points of contact when entering and exiting the machine with strategically placed walkways and grab rails.
- Superior brake performance meets the latest brake standards—
ISO 3450:2011. - The ground-level engine shut-off switch stops all fuel to the engine when activated and shuts down the machine safely.
- Sturdy 4-point mounted cabin meets rollover protective structure/
falling objects protective structure (ROPS/FOPS) standard. - 4-point seat belt provides enhanced safety to the operator.
- Seat belt indicator implements both visual and audible alerts to the
operator when seat belt is not fastened. - Lockout features help the service technician to perform
maintenance work on the machine with safe mode. - Secondary steering activates automatically in case of primary
system failure. - Overload speed limiter works with truck payload system to reduce
machine speed automatically when the truck is overloaded.
WORK IN COMFORT
- Completely redesigned cab for a whole new standard in visibility, comfort, and productivity.
- The new operator seat placement provides easier operation and comfort to the operator.
- Improvements in enlarged views of the work area and its surroundings.
- Access connectivity and decrease clutter with more storage areas in the newly designed cab.
- Automatic cab temperature controls.
- Cat next-generation deluxe seat for better operator comfort.
TECHNOLOGY THAT GETS WORK DONE
- Integrated systems give you the ability to make timely, fact-based
decisions to maximize efficiency, improve productivity, and lower
costs. - Gain valuable insight into how your machine is performing by continuously
monitoring and collecting vital machine data via the advisor display with the software Vital Information Management System (VIMS™). Applicable to both U.S. EPA Tier 4 Final/EU Stage V and U.S. EPA Tier 2 equivalent. - Truck Production Management System (TPMS) provides accurate weighing of the materials, stores 2,400 payload cycles, and reportson, haul cycle times, and distances with date and time stamps.
- External payload indicator lights alert the loader when to stop, reducing the risk of machine overloading.
- Product Link™ system connects to each machine wirelessly,
allowing you to monitor location, hours, fuel use, productivity, idle
time, and diagnostic codes. - VisionLink®
wirelessly connects you to your equipment, giving
you access to essential information you need to know to run your business. - The Cat 770 is MineStar™ ready and includes Cat Product Link
Elite and VIMS to help optimize equipment management, remote
monitoring capabilities, machine availability, and component life while reducing both repair costs and the risk of catastrophic
failure. - Tons kilometers per hour/tons miles per hour (TKPH/TMPH) tire management system works with TPMS for improved tire life.
REDUCED MAINTENANCE COST AND OTHER COSTS
• Grouped service points.
• Control particulate matter with two engine-mounted diesel
oxidation catalyst canisters. (Tier 4)
• NOx reduction system (NRS) technology replaces a portion of intake air with exhaust gas to control combustion temperatures and NOx production.(Tier 4)
• Parts commonality with other Cat equipment.
• Resolve problems before failure occurs with VIMS notifications.
• Torque converter stall (autostall) enables quick operating temperatures for best performance life.
• All LED lights provide longer life, brighter light, consume less power, and are more resistant to vibration or water damage.
APPLICATION VERSATILITY
- Get the right body option—Dual Slope, Flat Floor, or Quarry—for your material and jobsite needs.
- For haul profiles including steep slopes, an optional Dual Slope body is available—offering excellent material retention.
- The flat floor body is perfect for metering material, especially when
feeding the crusher. - Optimize your body life by selecting a liner package best suited
for your application. We offer steel liners that work for most applications as well as rubber liners for extreme applications.
Standard Equipment
-
NOTE
- Standard and optional equipment may vary. Consult your Cat dealer for details.
-
ELECTRICAL
- Alarm, backup
- Alternator, 115 ampere
- Auxiliary jump start receptacle
- Batteries, maintenance-free, 12V (2), 190 amp-hour
- Electrical system, 24V
-
Lighting system:
– Backup light (halogen)
– Directional signals/hazard warning (front and rear LED)
– Headlights, (halogen) with dimmer
– Operator access courtesy lights (Developing Market Only)
-
PRODUCT LINK™ COMMUNICATIONS
- Product Link Ready
-
GUARDS
- Driveline
- Engine crankcase
-
OPERATOR ENVIRONMENT
- Air conditioning
- Ashtray and cigarette lighter
- Coat hook
- Cup holders (4)
- Diagnostic connection port, 24V
-
Entertainment Radio Ready:
– 5 amp converter
– Speakers
– Antenna
– Wiring harness
-
Gauges/indicators:
– Air cleaner service indicator - electronic
– Brake oil temperature gauge
– Coolant temperature gauge
– Hour meter
– Tachometer
– Engine overspeed indicator
– Fuel level
– Speedometer with odometer
– Transmission gear indicator
- Heater/defroster (11 070 kCal/43,930 BTU)
- Hoist lever
- Horn, electric
- Light - dome
- Light - courtesy
- Messenger, display unit
- Mirrors
- Power port, 12V
- ROPS cab, insulated/sound suppressed
-
Seat, Cat Comfort Series III:
– full air suspension
– four-point harness
- Steering wheel, padded, tilt and telescopic
- Storage compartment
- Sun visor, tinted glass
- Throttle lock
- Windshield wiper (intermittent) and washer
-
POWER TRAIN
- Air-To-Air Aftercooler (ATAAC)
- Air cleaner with precleaner (1)
- Automatic cold mode idle control
- Electric start
- Turbocharger
-
Braking system, hydraulic actuated:
– Automatic Retarder Control (ARC) (utilizes rear oil-cooled, multiple disc brakes)
– Brake release motor (towing)
– Caliper-disc (front)
– Extended Life Brakes
– Oil-cooled, multiple disc (rear)
– Parking
– Secondary
– Service
-
Transmission:
– 7-speed automatic powershift
– Body up-shift inhibitor
– Controlled throttle shifting
– Directional shift management
– Downshift inhibitor
– Neutral start switch
– Neutral coast inhibitor
– Reverse shift inhibitor
– Reverse neutralizer during dumping
– Programmable top gear selection
-
SUSPENSION SYSTEMS
- Suspension, front and rear
-
OTHER STANDARD EQUIPMENT
- Body safety pin (secures body in up position)
- Body down indicator
- CD-ROM parts book
- Fan, hydraulic demand
- Fuel tank (530 L/140 gal)
- Guard, engine compartment
- Guard, mud
- Ground level battery disconnect
- Ground level engine shutdown
- Ground level grease fittings
-
Reservoirs (separate):
– Brake/converter/hoist
– Steering
– Transmission/torque converter
- Rims 15 × 33
- Rock ejectors
- Service platform, left and right side
- Supplemental steering (automatic)
- Tie down eyes
- Tow hooks (front)/Tow pin (rear)
- Vandalism protection locks
-
ANTIFREEZE
- Extended Life Coolant to -35° C (-30° F)
Optional Equipment
-
NOTE
- Standard and optional equipment may vary. Consult your Cat dealer for details.
-
OPTIONAL EQUIPMENT
- Cat Engine Brake
- Extended Life Brake Discs
- Body heat/diverter box
- Four (4) batteries
- HID lights
- Product Link
- Backup alarm
- Heated mirrors
- Fuel heater
- Ether aid
- Coolant heater
- Auto lube
- Rear vision camera (WAVS)
- Spare rims
- Wheel chocks
- Body sideboards
- Traction Control System (TCS)
