Technicial Specifications
| Engine Output - SAE J1995 | 1040 hp 776 kW |
| Bucket Payload | 23.8 ton (US) 21.6 t |
| Operating Weight | 253.8 ton (US) 230.2 t |
| Note | Specifications shown above apply to a Backhoe configuration. A frontless configuration is also available. Specifications shown above apply to a Backhoe configuration. A frontless configuration is also available. |
| Standard Bucket Capacity | 15.7 yd³ 12 m³ |
| Batteries (12V each) - In Series/Parallel Installation | 630 Ah – 24V 630 Ah – 24V |
| Components (3) | 9 LED high-brightness working flood lights: – 7 for working area<br>– 2 for rear end 9 LED high-brightness working flood lights: – 7 for working area<br>– 2 for rear end |
| Batteries (12V each) | 6 × 210 Ah 6 × 210 Ah |
| Components (1) | Emergency stop buttons inside cab, accessible from all seating locations, and engine module Emergency stop buttons inside cab, accessible from all seating locations, and engine module |
| Components (2) | Additional ground-level emergency stop Additional ground-level emergency stop |
| System Voltage | 24V 24V |
| Battery Isolation Relays | manual lockable disconnect switch and automatic disconnect relay manual lockable disconnect switch and automatic disconnect relay |
| Components (6) | 1 beacon lamp on cab roof 1 beacon lamp on cab roof |
| Components (5) | 7 LED service lights 7 LED service lights |
| Components (4) | 2 LED high-brightness access flood lights 2 LED high-brightness access flood lights |
| Features (2) | Variable electronically controlled flow of oil through cooler and fan speed Variable electronically controlled flow of oil through cooler and fan speed |
| Oil Flow of Cooling Pumps | 211 gal/min 800 l/min |
| Diameter - Fan | 4.92 ft 1500 mm |
| Features (1) | Cooling system fully independent of all main circuits, i.e. controlled cooling capacity available whenever engine is running Cooling system fully independent of all main circuits, i.e. controlled cooling capacity available whenever engine is running |
| Features (3) | Superior cooling efficiency to ensure optimum oil temperature Superior cooling efficiency to ensure optimum oil temperature |
| Components (5) | Full sized trainer seat with safety belt and work table Full sized trainer seat with safety belt and work table |
| Internal Dimensions of Cab - Width | 5.33 ft 1625 mm |
| Components (7) | Operator Protective Guard (rock guard; approved according to ISO 10262:1998 [Top Guard]) compliant Operator Protective Guard (rock guard; approved according to ISO 10262:1998 [Top Guard]) compliant |
| Components (9) | Roller blinds Roller blinds |
| Components (11) | Additional emergency ladder in close proximity to emergency escape window Additional emergency ladder in close proximity to emergency escape window |
| Internal Dimensions of Cab - Length | 7.32 ft 2230 mm |
| Components (8) | Windshield with parallel intermittent wiper/washer Windshield with parallel intermittent wiper/washer |
| Components (2) | Pneumatically cushioned and multi-adjustable operator seat with lumbar support, safety belt, head- and armrests Pneumatically cushioned and multi-adjustable operator seat with lumbar support, safety belt, head- and armrests |
| New BCS Features (1) | Robust instrument panel including large (254 mm/10 in) color touch screen Robust instrument panel including large (254 mm/10 in) color touch screen |
| New BCS Features (3) | Graphical data logging Graphical data logging |
| New BCS Features (4) | Fault memory capabilities Fault memory capabilities |
| Operator's Eye Level (approximate) | 18.04 ft 5.5 m |
| New BCS Features (2) | On-screen troubleshooting assistance On-screen troubleshooting assistance |
| Components (10) | Machine access via retractable access stairway, stairway angle approximately 45°, hydraulically operated Machine access via retractable access stairway, stairway angle approximately 45°, hydraulically operated |
| New BCS Features (5) | USB, Lan (TCP/IP) and CAN BUS interfaces for data export USB, Lan (TCP/IP) and CAN BUS interfaces for data export |
| Components (3) | Safety switch in operator's seat for automatic motion shutdown Safety switch in operator's seat for automatic motion shutdown |
| Internal Dimensions of Cab - Height | 6.79 ft 2070 mm |
| Components (1) | Large cab floor window with removable grating for easy cleaning Large cab floor window with removable grating for easy cleaning |
| Components (4) | Joystick integrated in adjustable seat armrest Joystick integrated in adjustable seat armrest |
| New Board Control System (BCS) Features: | Electronic monitoring, data logging and diagnostic system for vital signs & service data of engines, hydraulic & lube system Electronic monitoring, data logging and diagnostic system for vital signs & service data of engines, hydraulic & lube system |
| Components (6) | Auxiliary fold-away seat with safety belt for 3rd person Auxiliary fold-away seat with safety belt for 3rd person |
| Swing Ring | Triple-race roller bearing with sealed internal gearing Triple-race roller bearing with sealed internal gearing |
| Maximum Swing Speed | 4.9 r/min 4.9 r/min |
| Swing Drive | 2 compact planetary transmissions with axial piston motors 2 compact planetary transmissions with axial piston motors |
| Parking Brake | Wet multiple-disc brake, spring-loaded/hydraulically released Wet multiple-disc brake, spring-loaded/hydraulically released |
| Features (2) | All slew ring raceways and grease tub for internal gearing supplied by automatic, central lubrication system All slew ring raceways and grease tub for internal gearing supplied by automatic, central lubrication system |
| Features (1) | Open swing circuit with auto slow down when joysticks in neutral Open swing circuit with auto slow down when joysticks in neutral |
| Track Pads - Each Side | 45 45 |
| Components (1) | Forged double-grouser track pads Forged double-grouser track pads |
| Components (6) | Audible travel alarm Audible travel alarm |
| Bottom Rollers - Each Side | 8 8 |
| Travel Speed - 1st Stage - Maximum | 0.68 mile/h 1.1 km/h |
| Components (4) | Fully hydraulic self-adjusting track tensioning system with accumulator Fully hydraulic self-adjusting track tensioning system with accumulator |
| Components (5) | Automatic hydraulic retarder valve to prevent overspeed on downhill travel Automatic hydraulic retarder valve to prevent overspeed on downhill travel |
| Parking Brakes | Wet multiple disc brake, spring loaded/hydraulically released Wet multiple disc brake, spring loaded/hydraulically released |
| Travel Speed - 2nd Stage - Maximum | 1.49 mile/h 2.4 km/h |
| Gradeability - Travel Drives | Approximately 54% Approximately 54% |
| Components (3) | All running surfaces of sprockets, idlers, rollers and track chain links hardened All running surfaces of sprockets, idlers, rollers and track chain links hardened |
| Maximum Tractive Force | 265860 lbf 1183 kN |
| Travel Drives - Each Side | 1 planetary transmission with 2 two-stage axial piston motors 1 planetary transmission with 2 two-stage axial piston motors |
| Components (2) | Chain links connected by hardened pins and bushings Chain links connected by hardened pins and bushings |
| Support Rollers - Each Side | 3 3 |
| Type (3) | System condition and failures displayed by Board Control System System condition and failures displayed by Board Control System |
| Capacity - Grease Barrel | 54 gal (US) 205 l |
| Type (1) | Single-circuit progressive system with hydraulically driven heavy-duty pump and electronic time control Single-circuit progressive system with hydraulically driven heavy-duty pump and electronic time control |
| Type (2) | Grease supplied to swing roller bearing, all pivot points of attachment, and swing gearbox bearing Grease supplied to swing roller bearing, all pivot points of attachment, and swing gearbox bearing |
| Type (5) | Float valve for boom down function Float valve for boom down function |
| Type (2) | High-tensile steel with solid steel castings at pivot areas High-tensile steel with solid steel castings at pivot areas |
| Type (3) | Boom and stick stress-relieved after welding Boom and stick stress-relieved after welding |
| Type (1) | Boom and stick torsion-resistant with welded box design Boom and stick torsion-resistant with welded box design |
| Type (4) | Catwalks with rails at boom Catwalks with rails at boom |
| Buckets Equipped With | – Special liner material covering main wear areas inside and outside<br>– Lip shrouds<br>– Wing shrouds<br>– Heel shrouds – Special liner material covering main wear areas inside and outside<br>– Lip shrouds<br>– Wing shrouds<br>– Heel shrouds |
| Standard Track Pads | 2.62 ft 800 mm |
| Operating Weight | 507500 lb 230200 kg |
| Ground Pressure | 31.9 psi 22 N/cm² |
| Maximum Swing Oil Flow | 216 gal/min 783 l/min |
| Maximum Pressure - Attachment | 4495 psi 310 bar |
| Filters (4) | Pressure filters (6 μm) for servo circuit Pressure filters (6 μm) for servo circuit |
| Electronic Pump Management Contains (3) | Automatic return of main pumps to zero flow Automatic return of main pumps to zero flow |
| Features (2) | Cooling of pump transmission gear oil Cooling of pump transmission gear oil |
| Maximum Pressure - Travel | 4495 psi 310 bar |
| Maximum Pressure - Swing - Acceleration | 4495 psi 310 bar |
| Filters (3) | Full-flow filters (10 μm) for cooling return circuit Full-flow filters (10 μm) for cooling return circuit |
| Electronic Pump Management Contains (2) | Dedicated circuit pump allocation Dedicated circuit pump allocation |
| Maximum Total Oil Flow | 621 gal/min 2350 l/min |
| Filters (2) | Full-flow filters (10 μm) for complete return circuit Full-flow filters (10 μm) for complete return circuit |
| Main Pumps | 6 × variable swash plate pumps 6 × variable swash plate pumps |
| Filters (1) | Full-flow high-pressure filters (100 μm) for main pumps, installed directly behind each pump Full-flow high-pressure filters (100 μm) for main pumps, installed directly behind each pump |
| Electronic Pump Management Contains (4) | Automatic rpm reduction of engine speed during working breaks Automatic rpm reduction of engine speed during working breaks |
| Filters (5) | Transmission oil filter (40 μm) Transmission oil filter (40 μm) |
| Electronic Pump Management Contains (5) | Reduced oil flow of main pumps at high hydraulic oil temperature and at high engine temperature Reduced oil flow of main pumps at high hydraulic oil temperature and at high engine temperature |
| Electronic Pump Management Contains (1) | Electronic load limit control Electronic load limit control |
| Features (1) | Pressure cut-off function for all main pumps Pressure cut-off function for all main pumps |
| Total Volume of Hydraulic Oil | 925 gal (US) 3500 l |
| Hydraulic Tank Capacity | 740 gal (US) 2800 l |
| Maximum Pressure - Swing - Deceleration | 5080 psi 350 bar |
| Equipped With (3) | Indicator light for hydraulic tank full Indicator light for hydraulic tank full |
| Equipped With (1) | Quick couplings for: – Diesel fuel<br>– Engine coolant<br>– Pump transmission gear oil<br>– Engine oil (oil pan)<br>– Hydraulic oil Quick couplings for: – Diesel fuel<br>– Engine coolant<br>– Pump transmission gear oil<br>– Engine oil (oil pan)<br>– Hydraulic oil |
| Features | Centralized service area accessible from ground level. Centralized service area accessible from ground level. |
| Equipped With (2) | Cat jump-start socket Cat jump-start socket |
| Maximum Tearout Force | 146125 lb 650 kN |
| Maximum Breakout Force | 164050 lb 730 kN |
| Maximum Digging Reach | 52.17 ft 15.9 m |
| Maximum Digging Depth | 26.57 ft 8.1 m |
| Maximum Digging Height | 45.6 ft 13.9 m |
| Operating Weight | 254 ton (US) 230 t |
| Bucket Payload | 24 Sh Ton 22 t |
| Standard Bucket Capacity - Backhoe (Heaped 1:1) | 15.7 yd³ 12 m³ |
| Gross Power - SAE J1995 | 1040 hp 776 kW |
| Engine Model | Cat C32 ACERT Cat C32 ACERT |
| Net Power - SAE J1349 | 1032 hp 770 kW |
| Gross Power - SAE J1995 | 1040 hp 776 kW |
| Net Power - ISO 9249 | 1037 hp 774 kW |
| Net Power - SAE J1349 | 1032 hp 770 kW |
| Emissions | Meets China Nonroad Stage III emissions standards, equivalent to Tier 2 Meets China Nonroad Stage III emissions standards, equivalent to Tier 2 |
| Components (1) | Cat NOx reduction system Cat NOx reduction system |
| Components (7) | Two-stage fuel filter Two-stage fuel filter |
| Components (3) | MEUI™-C fuel system MEUI™-C fuel system |
| Alternator | 275A 275A |
| Bore | 5.71 in 145 mm |
| Components (4) | Hydraulically driven radiator fan with variable electronically controlled fan speed Hydraulically driven radiator fan with variable electronically controlled fan speed |
| No. of Cylinders | 12 12 |
| Displacement | 1959 in³ 32 l |
| Fuel Tank Capacity | 951 gal (US) 3600 l |
| Components (5) | Micro processed engine management Micro processed engine management |
| Rated Speed | 1,800 min-1 (1,800 rpm) 1,800 min-1 (1,800 rpm) |
| Aspiration | Turbocharged and air-to-air aftercooled Turbocharged and air-to-air aftercooled |
| Components (2) | Dual Diesel Oxidation Catalysts (DOCs) Dual Diesel Oxidation Catalysts (DOCs) |
| Components (8) | Additional high-capacity water separator including electric priming pump Additional high-capacity water separator including electric priming pump |
| Components (9) | Large fuel tank allows for 24 hour machine operation Large fuel tank allows for 24 hour machine operation |
| Components (6) | Heavy-duty air filters Heavy-duty air filters |
| Maximum Altitude without Deration | 2925 m (9,600 ft) – above sea level (a.s.l.) 2925 m (9,600 ft) – above sea level (a.s.l.) |
| Stroke | 6.38 in 162 mm |
| Make and Model | Cat C32 ACERT Cat C32 ACERT |
| Components (3) | Heavy-duty air filters Heavy-duty air filters |
| Components (4) | Two-stage fuel filter Two-stage fuel filter |
| Fuel Tank Capacity | 951 gal (US) 3600 l |
| No. of Cylinders | 12 12 |
| Components (2) | Micro processed engine management Micro processed engine management |
| Displacement | 1959 in³ 32 l |
| Maximum Altitude without Deration | 3622 m (11,884 ft) – above sea level (a.s.l.) 3622 m (11,884 ft) – above sea level (a.s.l.) |
| Bore | 5.71 in 145 mm |
| Components (1) | Hydraulically driven radiator fan with variable electronically controlled fan speed Hydraulically driven radiator fan with variable electronically controlled fan speed |
| Stroke | 6.38 in 162 mm |
| Aspiration | Turbocharged and air-to-air aftercooled Turbocharged and air-to-air aftercooled |
| Components (5) | Additional high-capacity water separator including electric priming pump Additional high-capacity water separator including electric priming pump |
| Rated Speed | 1800 min-1 (1,800 rpm) 1800 min-1 (1,800 rpm) |
| Alternator | 275A 275A |
| Make and Model | Cat C32 ACERT Cat C32 ACERT |
| Components (6) | Large fuel tank allows for 24 hour machine operation Large fuel tank allows for 24 hour machine operation |
| Gross Power - SAE J1995 | 1033 hp 771 kW |
| Net Power - ISO 9249 | 1024 hp 764 kW |
| Net Power - SAE J1349 | 1019 hp 761 kW |
| Emissions | Meets Tier 4 Final and Stage V emissions standards Meets Tier 4 Final and Stage V emissions standards |
| Net Power - SAE J1349 | 1019 hp 761 kW |
| Gross Power - SAE J1995 | 1033 hp 771 kW |
| Engine Model | Cat® C32 ACERT™ Cat® C32 ACERT™ |
Advantages and Features
SAFETY
- Operator Protective Guard (Top Guard) certified cab with safety glass windshield.
- Excellent visibility thanks to cab position that provides clear view to the digging and loading areas, in-floor window that provides a view to the tracks, LED lighting, and optional camera monitoring system.
- Multiple emergency shut-off switches, including a pull switch accessible from the ground.
- Safer access and egress with wide anti-slip walkways, retractable 45-degree stairway and three means of egress for fast emergency exit.
- Safer service with lockable battery isolation and starter lockout switch, plus safe access to power module components from machine platform and counterweight.
OPERATOR CAB
- Quiet and fully pressurized cab with ergonomic operator seat and controls, superior insulation, extensive in-cab air distribution via powerful HVAC unit and multiple, optimally positioned vents.
- Easily accessible ergonomic joysticks with Electronic-Hydraulic Servo Control, which delivers dynamic and precise response and ensures no hydraulic lines are present in the cab.
- Greater controllability with ergonomic joystick controls and five circuit hydraulics that allow for two-cylinder motions, two travel motions, and swing to be controlled simultaneously.
- Enhanced training capability, with patented 3-seat design, elevated observer’s work station and easily dual in-cab emergency stop buttons.
- 10-inch high-definition color touchscreen display that includes troubleshooting aids and machine documentation.
RELIABILITY & DURABILITY
- Better wear of undercarriage components thanks to floating push tube, which delivers even idler slide wear and extended component life; low wear drive system via induction hardened and high quantity of sprocket teeth; and optional rough terrain undercarriage protection kit.
- Cat exclusive Positive Pin Retention 2 (PPR2) Track design, which resists pin walking and link cracking for reliable sealing and maximum track life.
- Structures designed and fabricated to withstand the toughest digging conditions, with high-strength steel; full penetration, profiled and ground welds at critical junctures; and booms and sticks that are stress-relieved after welding.
- Efficient Independent Oil Cooling system, which protects and extends the life of hydraulic components.
PRODUCTIVITY & PERFORMANCE
- Up to 25% greater efficiency through Hydraulic Optimization, which dynamically assigns individual pumps or groups of pumps to deliver the exact flow and pressure that each hydraulic function requires.
- Durable Cat C32 engine, which offers unsurpassed performance, high power output and proven reliability, and has been proven to withstand the challenging conditions found at mine sites across the globe.
- Engine optimized for low fuel consumption at 1,800 rpm and lower speeds, plus significant gains in fuel consumption through collaboration of engine and machine integration.
- Maximum uptime, without work interruption for regeneration, engine derate, or cold weather treatment of secondary fluid.
BUCKETS & GET
- Buckets and ground engaging tools (GET) designed to maximize durability and productivity and ideally matched to your shovel and application.
- Integrated to work as part of a machine system — helping you achieve high productivity and the lowest cost per ton.
- Variety of sizes and wear packages for the ideal match to your shovel and application.
- Four tip shapes of hammerless GET designed specifically for the 6020B, with no special tools required for removal and installation.
- Wear packages that protect your investment, including special liner material and lip shrouds, wing shrouds and heel shrouds.
CONNECTIVITY & TECHNOLOGY
- Greater connectivity with improved Product Link™ Elite system, which increases the availability of data provided by the 6020B and allows it to collect and transmit information into locally hosted or cloud-hosted applications such as Cat MineStar™ Solutions Health Office, Health Equipment Insights, or Equipment Care Advisor.
- Earliest possible detection of faults, with Board Control System that uses sensors throughout the machine to monitor operating data, record faults, and notify the operator audibly and visually.
- Factory-ready for Cat MineStar™ Solutions, with a range of capabilities that meet the needs of your fleet.
SERVICEABILITY
- Modular design that facilitates quick field assembly — as few as 14 days in typical condition.
- Exchangeable power module that can be quickly swapped out for a spare, then transported for repair in a safe, convenient and clean environment.
- Exceptional component accessibility and weather protection via first-in-class and spacious walk-through power module.
- Superior swing system component accessibility via boom-mounted hydraulic valve block, and ground-level accessible service fluid fill points and jump start receptacle.
- Simplified undercarriage serviceability, with automatic track tensioning system, which requires no manual adjustment; externally serviceable break; and PPR2 Tracks that are easily serviced with a master joint.
SUSTAINABILITY
- Highly regulated C32 engine certified to meet U.S. EPA Tier 4 Final/EU Stage V emissions standards without the need for DEF — saving time and cost during maintenance.
- Sound-suppressed power module to keep spectator sound levels low.
- Preservation of raw materials, energy conservation and reduced emissions through the Cat Reman and Cat Rebuild programs, which return end-of-life components to like-new condition.
Optional Equipment
-
SUPERSTRUCTURE
- Cold-weather package
- Lube fast fill port
-
CAB
- Redundant HVAC system
- Camera system
- Cat MineStar Health ready
-
UNDERCARRIAGE
- Rough terrain undercarriage protection kit including belly plate and rear plumbing guard
- Dirt scraper on swivel connection
- Track pad width 1000 mm (3 ft 3 in)
-
ATTACHMENT
- LED work lights on boom
-
BUCKETS
- Additional buckets available, based on application, through your local Cat dealer
